WX2NB Manual v.1.0
Page 30 / 40
Specify the time from loss of communication after which the transmitter should
attempt to restore it. This is configured in the [Reset after time elapsed] field and is
defined in minutes.
Next, specify what action the device should perform. This is configured by checking
the appropriate box next to the reaction description:
Reset modem
Reset device
Activate output
If Wi-Fi connection is lost, the device will wait for the specified time once it
detects this fact, then perform the specified tasks.
6.6.
PHONE LINE
The device is equipped with simulated PSTN phone line, which may collect
information from an control panel using its a phone communicator, and next
transmit them via Wi-Fi. The mentioned below parameters shall be defined for
proper operation of the device.
6.6.1.
Phone line
This tab is provided to determine settings of telephone line.
6.6.1.1.
Report off-hook time longer than
If a phone set is connected in parallel output of control panel communicator (to
terminals T1-R1 of transmitter), picking up of a phone prevent from exchange of