WX2NB Manual v.1.0
Page 13 / 40
SP-PROG-BT). All channel connection (also USB and Bluetooth) "open" virtual COM
serial ports used in communication control panel-Configurator.
To program device or make any other operations (e.g. reading of device settings,
firmware amendments, etc.) it is necessary firstly to define connection parameters.
For the above purpose you shall use the following window, available after activating
File option from the Main Menu and selecting Connection function or after clicking
icon on a taskbar and opening RS232 tab.
Define:
Name of connection e.g. Local
Choose serial port e.g. COM1
Click on [Add] button to confirm settings. Connections shall be saved (and inserted
in table). From this time on program shall enable wires connection with device and
reading, and saving of parameters in WX memory will be possible.
In the next tab "MINI-PROG" (the name derived from the programmer) you have to
also define the connection parameters.
Operations are the same as with the "RS232" tab. Specify the name, the correct
COM port and add a connection.
Programmers MINI-PROG-BT and SP-PROG-BT have microUSB ports, through which
we can connect to the computer using the USB port, but also have built-in Bluetooth
interface.