WX2NB Manual v.1.0
Page 12 / 40
5.3.1.
File->New
Opens new set of parameters. Editing of configuration parameters is possible.
Select type of device (WX2NB).
5.3.2.
File->Open
If file contains saved settings, they may be used to program next device. Firstly a
catalogue where file has been saved shall be chosen and then name of file shall be
provided. Obtained data collection may be modified by the user. Any amendments
are effective if send to device.
5.3.3.
File->Save
During programming many devices in different configurations, it is not necessary to
have in mind each one as it may be saved on hard disc or floppy disk under any
name and it may be loaded later on. This function save on disc any information from
configuration wizard window. After activation of function a dialog window appears
with request to provide file name. Default data is saved with CMI extension
(Configuration Memory Image).
5.3.4.
File->Language
Allows for selection of any available languages (determined in attached exterior
language files).
5.3.5.
File->Connections
Before programming of devices, a connection type shall be defined. It is possible to
do it with two methods:
- locally
- remotely.
5.3.5.1.
Local connection
Local connection means that configuration software (namely computer on which is
installed) is directly connected to proper terminal of transmitter via special wire and
through RS-232 serial port (GD-PROG) or USB port or Bluetooth (MINI-PROG-BT,