15
ENGLISH
VERSION WITH ON-BOARD PUMP INVERTER (E-SPD+ MT2200
– TT4000)
QP = Protection panel
P
1(2,3)
= Electric pump 1(2,3)
TR = Transducer
INV
1(2,3)
= Inverter 1(2,3)
*Lm
1(2,3)
= Magnetic core, only for MV models
*Lt
1(2,3)
= Magnetic core, only for TT models
Notes:
-
for connecting the protection panel to the power supply line, see the attached panel manual
-
The connections with dash lines are the responsibility of the installer
Note: “Lm” magnetic core application (E-SPD+ MV model MT2200)
For single-phase models (E-SPD+ MV 2200), the magnetic core is positioned close to the inverter, encasing the power cable,
as shown in the inverter's specific instruction manual.
Note: “Lt” magnetic core application (E-SPD+ model TT4000)
For three-phase models (E-SPD+ TT 4000), the magnetic core is positioned encasing the 4 motor power connecting cables,
therefore close to the “MOTOR OUTPUT” terminal block of the inverter internal board.
POWER SUPPLY
Summary of Contents for GP
Page 2: ......
