Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com
81
Passive Point Source
Application Guide
2. MKC Series Pan & Tilt Bracket limits of use
a. The MKC Series Ceiling/Pan & Tilt
Brackets are designed to mount MKC50
and MKC60 loudspeakers only. No other
MKC Series may be used with this bracket.
b. MKC Series Brackets are designed
to mount only one loudspeaker per
bracket.
c. Any geometric or structural modifications to the MKC Series Pan & Tilt Bracket or
hardware are not EAW-approved will void the warranty and may result in damage, injury,
or death.
d. MKC Series Pan & Tilt Bracket is not intended to be used with direct exposure to
elements, and is not approved in situations where weather protection is required.
Pan & Tilt Bracket with Link Bracket
3. Installation of the MKC Series Pan & Tilt Wall Bracket
(B) to Ceiling Bracket (F)
a. Test fit MKC Series Ceiling/Pan & Tilt Bracket on an
MKC50 or MKC60 Loudspeaker to confirm the correct
angle and bracket orientation before installing the
wall bracket to the ceiling bracket, and ceiling bracket
to surface. Also verify desired configuration and
mounting procedure will allow for easy tool access
when needed.
b. Configurations - Depending on mounting option
used, MKC50 or MKC60 may be installed in a vertical
or horizontal orientation with the ability to pan or
tilt depending on mounting position of the wall
bracket. Using the Link Bracket, it is possible to mount
with both pan and tilt ability in either loudspeaker
Exploded view of ceiling bracket kit with
plastic Pan & Tilt Mount kit