Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com
66
Passive Point Source
Application Guide
5. Review the MKC Series Loudspeaker installation
a. Confirm the loudspeaker is level or plumb depending on the configuration.
b. Confirm the aim angle is as expected.
c. Confirm all hardware is tight.
6. Maintenance of an MKC Series U-Bracket installation
a. WARNING: Not following Maintenance instructions could result in equipment damage,
serious injury or death.
b. Maintenance should only be performed by an experienced technician.
c. As with any professional loudspeaker system, routine maintenance must be conducted in
order to ensure the longevity and safe, consistent performance.
d. Inspect the MKC Series Pan & Tilt Bracket for damage. Brackets with visible damage
should be replaced and discarded.
e. Inspect hardware securing the u-bracket to the mounting surface for corrosion or
looseness. Tighten loose hardware and consider installing hardware locking methods.
Replace and discard corroded hardware.
f. Inspect hardware mounting the MKC Series loudspeaker to the brackets for corrosion or
looseness. Tighten loose hardware. Replace and discard corroded hardware.
g. Clean the MKC Series Pan and Tilt Brackets and MKC Series Loudspeaker with a dry cloth.
7. Dismantling the MKC Series U-Bracket installation
a. Fully support the weight of the MKC Series Loudspeaker. Using a 4mm Allen wrench,
remove the screws securing either the Speaker Bracket or Link Bracket. Carefully lower the
loudspeaker to the ground.
b. Remove the mounting hardware securing the Wall Bracket to the mounting surface.
c. Discard all damaged components.