Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com
48
Passive Point Source
Application Guide
U-Brackets for QX Series
QX500 & QX300 Series have optional U-Brackets that may be used. These brackets my only be
deployed horizontally, and MUST be used with adapter brackets that are not included with
the U-Bracket kit. Without the adapter brackets, the U-brackets cannot physically attach to the
cabinets.
Each Adapter Bracket ships with mounting stud nut and washers. The bracket allows for angle
locking every 15°. Two brackets will be needed per QX, and they ship in pairs for this reason.
It is important to note the center hole on U-Bracket (as indicated below) is meant for cable pass
through and NOT for mounting.