Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com
63
Passive Point Source
Application Guide
2. MKC Series Pan & Tilt Bracket limits of use
a. The MKC Series Pan & Tilt Brackets are
designed to mount MKC50 and MKC60
loudspeakers only. No other MKC Series
may be used with this bracket.
b. The MKC Series Pan & Tilt Brackets
are designed to mount only one
loudspeaker per bracket.
c. Any geometric or structural modifications to the MKC Series Pan & Tilt Bracket or
hardware are not EAW-approved will void the warranty and may result in damage, injury,
or death.
e. WARNING: Take care when lifting MKC Series products to avoid harm or damage to
product.
f. MKC Series Pan & Tilt Bracket is not intended to be used with direct exposure to
elements, and is not approved in situations where weather protection is required.
Pan and Tilt with Link Bracket
installed on MKC60
Pan & Tilt Bracket with Link Bracket
3. Installation of the MKC Series Pan & Tilt Bracket to a
mounting surface
a. Test fit an MKC Series Pan & Tilt Bracket on an
MKC50 or MKC60 Loudspeaker to confirm the correct
angle, loudspeaker and bracket orientation before
installing the wall bracket to the mounting surface.
Also verify desired configuration and mounting
procedure will allow for easy tool access.
b. Configurations - Depending on mounting option
used, MKC50 or MKC60 may be installed in a vertical
or horizontal orientation with the ability to pan or
tilt depending on mounting position of the wall
bracket. Using the Link Bracket, it is possible to mount
with both pan and tilt ability in either loudspeaker
orientation.