Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com
65
Passive Point Source
Application Guide
b. Connecting Speaker Bracket to Wall Bracket with
NO Link Bracket
i. Line up the two brackets and secure with M6
screw and lock nut
ii. Tighten with 4mm hex tool. Do not tighten
fully.
iii. Rotate or tilt MKC loudspeaker using the
moulded grooves to lock angle in place.
iv. Once desired angle is achieved, fully tighten
the screw.
c. Connecting the Speaker Bracket to the Wall
Bracket WITH Link Bracket
i. Based on test fit, determine if tool access is
improved with Link Bracket connected to the
Wall Bracket or the Speaker Bracket
ii. Connect Link Bracket to Wall or Speaker
Bracket using M6 screw with lock nut. Tighten
with a 4mm hex tool. Do not tighten fully.
iii. Connect Link Bracket to remaining Wall or
Speaker Bracket using M6 screw with lock nut.
Tighten with a 4mm hex tool. Do not tighten
fully.
iv. Rotate or tilt MKC loudspeaker using the
moulded grooves to lock initial angle in place.
v. Once desired angle is achieved, fully tighten
the screw.
vi. Repeat the last two steps above to achieve
second pan or tilt angle.
Connecting the Pan & Tilt Wall and
Speaker Brackets
Connecting the Pan & Tilt Wall and
Speaker Brackets using the Link Bracket
