Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com
69
Passive Point Source
Application Guide
c. Mounting options
NOTE: It i s recommended that you consult a building professional for the proper mounting
hardware before mounting the bracket. Due to various construction methods and materials, the
hardware for securing the bracket to the mounting surface is not supplied. It is required that the
use of hardware locking methods, not limited to lock washers, thread-locker, or nylon-retention
feature, be applied when securing the pan and tilt wall bracket to the mounting surface or
structure.
Each MKC Series Metal Pan & Tilt wall bracket (A) hole will need to mount to permanent structure
i. All four mounting holes will need to mount to permanent structure utilizing
approved mounting hardware.
ii. Consider orientation of loudspeaker (horizontal or vertical) before securing bracket
to the wall.
4. Installation of an MKC Series or MKD526
Loudspeaker to the MKC Series Metal Pan
& Tilt Bracket.
a. Choosing an MKC Series or MKD526
Loudspeaker configuration
i.
Note if loudspeaker will need to pan
or tilt, or perform a combination of
both options.
ii. Consider orientation of loudspeaker
(horizontal or veritical) before
securing speaker bracket.
iii. To connect bracket to the
speaker, remove hardware from
rear of MKC Series or MKD526, place
speaker bracket (B) over mounting
pattern, and secure with previously
removed hardware.
Each mounting hole will correspond to
mounting hole on an MKC Series product
or MKD526