User manual SEFELEC 5x Series
174
v1.06
In the case of incorrect syntax the
dialogue error 1 message
is displayed. In the case of a
code out of context the
dialogue error 2 message
is displayed (a code specific to a func-
tion when we are not in this function, or a digital value outside the limits).
17.5.6.
LIST OF ETHERNET COMMANDS
The syntax of the commands sent on the
ETHERNET
connection is consistent with the
IEEE488-2
standard (1992 revision).
Reminders of the digital formats according to the
IEEE488-2
standard.
NR1
format
: +/-<digit>...<digit>
NR2
format
: +/-<digit>...<digit>.<digit>...<digit>
NR3
format
: +/-<digit>...<digit>.<digit>...<digit>E+/-<digit>...<digit>
Note: The codes in brackets are the expanded codes that can be interpreted by the de-
vice.
17.5.7.
ORDERS
The command set of the
ETHERNET
option
SEFELEC 5x
is the same as that of the
RS232 interface. It is described in detail in the
RS-232C interface
paragraph
.
17.5.8.
ERROR MESSAGE
The message:
CONNECTION IMPOSSIBLE
appears, there are two cases to be considered:
The device has not been identified, press on Ethernet again
You have left a communication with the device open, close the connection and press
on Ethernet again
Summary of Contents for SEFELEC 1000-M
Page 131: ...User manual SEFELEC 5x Series 130 v1 06...
Page 205: ...User manual SEFELEC 5x Series 204 v1 06 EU DECLARATION OF CONFORMITY...
Page 206: ...User manual SEFELEC 5x Series 205 v1 06...
Page 207: ...User manual SEFELEC 5x Series 206 v1 06...