User manual SEFELEC 5x Series
163
v1.06
ETHERNET INTERFACE
Note:
IMPORTANT: The ETHERNET function must be selected in the config-
uration menu, on the Interface line: ETHERNET.
SEFELEC 5x range test and measurement instruments can be fitted with an Ethernet inter-
face. It enables the integration of all the instruments of the range in an automatic test or
measurement system whether it is intended for production control or entry control.
The interface is accessible via an RJ45 connector on the rear of the device.
The implementation of the safety loop is essential. The control of the device
and therefore the generation of a dangerous voltage by ETHERNET can be done from a
point where visual inspection of the device is not possible.
Summary of Contents for SEFELEC 1000-M
Page 131: ...User manual SEFELEC 5x Series 130 v1 06...
Page 205: ...User manual SEFELEC 5x Series 204 v1 06 EU DECLARATION OF CONFORMITY...
Page 206: ...User manual SEFELEC 5x Series 205 v1 06...
Page 207: ...User manual SEFELEC 5x Series 206 v1 06...