schmersal SLC440, Operating Instructions Manual

Page: 1 / 20

EN
Operating instructions pages 1 to 20
Original
SLC440 Series
SLG440 Series
Operating instructions
Safety light curtain / safety light grid
EN 1
1. About this document
1.1 Function
This operating instructions manual provides all the information you
need for the mounting, set-up and commissioning to ensure the safe
operation and disassembly of the safety switchgear The operating
instructions must be available in a legible condition and a complete
version in the vicinity of the device
1.2 Target group: authorised qualified personnel
All operations described in this operating instructions manual must
be carried out by trained specialist personnel, authorised by the plant
operator only
Please make sure that you have read and understood these operating
instructions and that you know all applicable legislations regarding
occupational safety and accident prevention prior to installation and
putting the component into operation
The machine builder must carefully select the harmonised standards to
be complied with as well as other technical specifications for the selection,
mounting and integration of the components
1.3 Explanation of the symbols used
Information, hint, note:
This symbol is used for identifying useful additional information
Caution: Failure to comply with this warning notice could
lead to failures or malfunctions
Warning: Failure to comply with this warning notice could
lead to physical injury and/or damage to the machine
Content
1 About this document
11 Function 1
12 Target group: authorised qualified personnel 1
13 Explanation of the symbols used 1
14 Appropriate use 2
15 General safety instructions 2
16 Warning about misuse 2
17 Exclusion of liability 2
2 Product description
21 Purpose 2
22 Bluetooth interface 2
23 Ordering code 2
24 Special versions 2
25 Scope of delivery and accessories 2
26 Technical data 3
27 Response time (reaction time) 4
28 Safety classification 4
29 Functions 4
291 Protective mode / Automatic 5
292 Restart Interlock (operation) 5
293 Restart interlock with double acknowledgement/reset 5
294 Fixed blanking SLC 440 6
295 Fixed blanking with movable edge region (SLC440 only) 6
296 Floating blanking SLC440 6
297 Blanking of moving objects (SLG440) 7
298 Contactor control (EDM) 7
299 Rotating the display by 180 degrees 8
210 Self-test 8
211 Beam coding A 8
212 Bluetooth 8
3 Parameterisation
4 Mounting
41 General conditions 10
42 Protection field and approach 10
43 Setting mode 10
44 Safety distance 11
45 Increasing the safety distance in the event of risk of a protection
field overlap 12
451 Minimum distance to reflecting surfaces 13
46 Dimensions 14
461 Dimensions emitter and receiver SLC440 14
462 Dimensions emitter and receiver SLG440 14
47 Accessories, included in delivery 15
48 Optional accessory 15
5 Electrical connection
51 Wiring diagram 16
52 Wiring example 17
53 Connector configuration Receiver, Emitter & Cable 17
6 Set-up and maintenance
61 Check before start-up 17
62 Maintenance 17
63 Regular check 17
64 Half-yearly inspection 18
65 Cleaning 18
7 Diagnostic
71 Status information LED 18
72 Status information, receiver end plug 18
73 Fault diagnostic 19
8 Disassembly and disposal
81 Disassembly 19
82 Disposal 19
9 Appendix
91 Contact 19
10 EU Declaration of conformity
Version 3.0
x
000 / 03
2020 / v
A
- 103034999-EN /
A / 2020-03-10 /
AE-Nr
-