SC200 Handbook
84
Copyright © 2007-2011 Eaton Corporation. All Rights Reserved.
IPN 997-00012-50H November 2011
Communication via Web Browser
The SC200 system controller has an in-built web server. This allows a PC/laptop with a
standard web browser to control and monitor the SC200 via an IP network.
► To connect to the SC200 with web browser:
1
Set up Ethernet communications and connect the SC200 to the IP network. See Ethernet
Communications on page
2
Open a web browser window.
Recommended web browsers: Microsoft Internet Explorer 8 or later (IE6 is compatible but
with reduced performance), Mozilla Firefox 3.0 or later.
3
Type the IP Address of the SC200 into the address bar of the browser.
If HTTPS Access has been enabled and you wish to use secure web communication (see details
on page
) then type "https://" before the IP Address.
4
The SC200 web server
Log On
page will appear.
5
If required, type a Logon ID and Password. Otherwise select
Default User
.
Administration of Logon IDs and Passwords is available in DCTools/Web.
See Web Access
Security on page
6
Click
Log On
. The SC200 web system page will be displayed.
