48
Electrical Requirements
Electrical
Requirements
SAE J-1939/11 Recommended Cable Splice Procedure
Remove cable outer jacket approximately 40-100 mm.
Remove foil shield from exposed wires to within 2 mm from cable jacket.
Strip insulation from data wires 7 mm ± 0.8 mm.
Attach X-link wire to drain wire with crimp splice per manufacturer’s recommendation.
Slide adhesive filled shrink tube over crimp splice.
Slide adhesive filled shrink tube over cable end.
Shrink Tube
Cross Link
Drain Wire
Shrink Tube
Cable
Crimp
Data Wires
Cable
Shrink Tube
Drain Wire
Data Wires
Final Assembly
