30
Electrical
Requirements
Electrical
Requirements
Power Harness
Note:
Main Power and Ground must be able to carry 20 amps @ 9 volts with no more than .05 ohms from the battery
source.
Note:
Main battery source can be starter or battery terminals. Frame rails and splices into other harnesses are not con-
sidered reliable battery sources.
FROM
TO
WIRE DESCRIPTION
J3-A
T2
Ground
J3-B
J2-B
12 Volts
J2-A
T1
Battery
J2
PACKARD
BODY: 12020341
CONNECTOR SEAL: 120773
8
3
TERMINAL:
12033997 (10-12 AWG)
CAP: 12033731
CABLE SEAL:
12040972 (12 AWG)
120
8
5024 (10 AWG)
30 AMP Fuse
In-Line Fuse
PACKARD
BODY: 12059641
CONNECTOR SEAL: 120773
8
3
TERMINAL:
12033997 (10-12 AWG)
CABLE SEAL:
12040972 (12 AWG)
120
8
5024 (10 AWG)
T1 connects to the
(+) side of the
Main Battery Source
T2 connects to the
(-) side of the
Main Battery Source
T2
J3
T1
J3-1 Connector
