17
Installation
Requirements
Lubrication Requirements
General lubrication Requirements
1.
Synthetic Dexron® III must be used in the WetClutch section of the transmission. Oil must be filled to the
proper level prior to OEM shipment.
2.
Roadranger® CD 50 must be used in the transmission gear box section of the transmission. Oil must be filled
to the proper level prior to OEM shipment.
3.
Make sure oil is within dipstick marks.
Note:
Oil should be checked at idle in neutral.
4.
Oil checks can be performed when the oil temperature is 60° to 120°F. The oil level should be within the dip-
stick Full and Add marks.
5.
The operational level should always be within the operating marks on the dipstick. The exact amount of oil
depends on the transmission inclination and cooling system capacity.
6.
Insufficient oil damages the pump and other components and can affect the function and reduce the life of the
transmission
Note:
DO NOT OVERFILL. This causes foaming, overheating, loss of fuel economy and possibly not shifting.
7.
When adding oil, types and brands of oil should not be mixed because of possible incompatibility.
8.
Use clean oil and clean containers when filling the transmission. Containers that have been used for anti-freeze
or water should not be used for transmission oil.
9.
A label identifying OEM filled oil is required near the dipstick tube opening. See figure below.
CHECK OIL LEVEL AT
ENGINE IDLE IN NEUTRAL
FACTORY FILLED WITH
SYNTHETIC DEXRON
¨
III
Fuller Transmissions
691757
