132
DeviceNet external communication cards
POWERXL DG1 SERIES VFD
MN040010EN—September 2016 www.eaton.com
Assembly instance 107
Table 170. Instance 107 (Input) length = 8 bytes
Byte
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
0
AtReference
RefFromNet
CtrlFromNet
Ready
Running2
Running1
Warning
Faulted
1
Drive State
2
% Speed Actual (Low Byte)
3
% Speed Actual (High Byte)
4
Process DataOut1 (Low Byte)
5
Process DataOut1 (High Byte)
6
Process DataOut2 (Low Byte)
7
Process DataOut2 (High Byte)
Refer “State transition diagram,” provided under “Control Supervisor Object” and “Drive State” table specified at
end of “Input Instances” section.
Drive State
0x00
DN_NON_EXISTANT
0x01
DN_STARTUP
0x02
DN_NOT_READY
0x03
DN_READY
0x04
DN_ENABLED
0x05
DN_STOPPING
0x06
DN_FAULT_STOP
0x07
DN_FAULTED
Speed Actual. This is the actual value from the frequency converter. The value is between 0 and 10000. In the application,
the value is scaled in percentage of frequency area between set minimum and maximum frequency.
(0 = 0.00%–10000 = 100.00%).
otee:
N
See info on Assembly 101 for varying values in the Process Data Out 1 and Process Data Out 2 Bytes. See
Appendix B
on default Process Data info.
