User Menu Options
Page 41
Wired Keypads
Sounders in wired keypads (not i-on Compact).
KEY-RKPZ
Sounder in KEY-RKPZ two-way radio keypads.
KEY-RAS
Sounder in KEY-RAS two-way radio keypads.
Internal Sounders
SDR-RINT internal radio sounders.
3.
If applicable, press
or
to select whether to operate all
sirens\sounders of the selected type, or (for partitioned system only)
only those assigned to a specific partition. Press
to switch the
sirens\sounders on, and
again to switch them off.
4.
Press
to finish the test.
Testing a wired keypad
(Not available for i-on Compact.)
Note:
You can test only the keypad you are currently using (you cannot
test a keypad remotely).
To carry out the test:
1.
Select
Test
– Wired Keypad
.
The bottom line of the display shows the keypad name and bus
address. For example:
All four ABCD LEDs and LEDs around the navigation keys should
glow red.
2.
Press
,
,
and
in turn to test the navigation keys. Each time
you press a key, the LEDs should change colour and the display show
the key you pressed.
3.
Press both HUA keys at the same time. The display should confirm
that you pressed the HUA keys. An HUA alarm is not generated.
4.
Press any other key to test it. The display should confirm the key you
pressed.
5.
Press
to finish the test.
