User Menu Options
Page 48
System configuration
The
System Config
menu allows you to change some parts of the system
to suit your particular needs.
Note:
The menu map on page 28 specifies the options available for each
user type.
Switching facilities on/off
System Config
– Facilities On/Off
can be used to switch the following
facilities on or off:
Chime
Use this option to enable or disable the chimes that
occur when a zone is triggered that has a Chime
attribute (as set up by the installer). For most zone
types, a chime occurs only when the system is unset.
Remote Access
Use this option to enable or disable remote access to
the control unit from the web interface or
SecureConnect.
Note:
By default, this feature is off for security reasons.
Make sure that any installer requesting access is your
authorised installer. Switch off remote access once the
installer has finished.
Level 4 Update
Use this option to enable or disable access to the
control unit from the level-4 user. There can be only one
level-4 user, which only the installer can create.
The level-4 user is able to:
a) Update the firmware and language files at the control
unit automatically or using the web interface.
b) Log into the user menu or web interface and change
the level-4 user name and code.
The level-4 user cannot perform other tasks, such as to
set or unset the system, omit zones, etc.
Activity Monitor
Setting this option to
On
enables social care activity
monitoring. The installer can specify the zones to
monitor for activity, the monitoring period, and the
minimum period between activations. For example, if
the monitoring period is 9am to 10pm, and the minimum
period between activations is 2 hours, the control unit
