User Menu Options
Page 55
by
On Time
(see below). When set to Yes, the output
changes state every time a user operates the output, or
according to a schedule if you specify
On Time
,
Off Time
and
Days
(see below).
On Time/Off Time/Days
If Latched is set to No, use
On Time
to specify the number
of seconds you want the output to remain active. If you
specify zero seconds, the output will not operate.
You can use
On Time
,
Off Time
and
Days
to specify a
schedule for the output to activate and deactivate
automatically. Use
On Time
and
Off Time
to specify the
time you want the output to activate and deactivate. Use
Days
to specify the days of the week you want the output to
operate (use
or
to display each day, then
or
to
choose Yes or No).
Note:
If a user activates the output while it is deactivated,
the output stays activated until the control unit reaches the
next off time. If a user de-activates the output while it is
activated, the output deactivates until the control unit
reaches the next on time.
Leave
On Time
,
Off Time
and
Days
without values if you
want the output to act as a simple on/off switch.
Press
when you have finished editing
On Time/Off
Time/Days.
Managing remote controls
You can use
System Config
– Remotes
to specify the functions that can be
carried out using remote controls. The
System Config
– Remotes
menu
contains the following options:
Edit
Used to edit the programming of the buttons, such as
the buttons used to set or unset the system, or operate
outputs.
Delete
Deletes a selected remote control.
Delete All
Deletes all remote controls.
Unset
Enables or disables the ability for all remote controls to
unset the system.
