5
Installation Guide
GREEN MOTION FLEET & BUILDING
www.eaton.com
Reference:
1
.
Fixed screws - x13
2
.
EV charger front cover
A
Prepare the EV charger(s)
Insert the SIM card .
Replace the front
cover
(1)
and tighten
the screws .
Recommended
screw torque is
1 .0 N .m (9 .6 lbf .in)
Loosen 13 screws
(1)
on the rear of the charger, and then remove
the front cover
(2)
Unscrew the two bolts
(1)
on the side
of the adapter plate and remove the
plate
(2)
. Set the bolts aside for now .
If a SIM card is not needed, then skip this step and go to:
•
Section B
if mounting to a wall
•
Section C
if mounting to a pedestal
Repeat Steps A-1 through A-4 if you plan to install a second charger onto a pedestal
STEP A-1
STEP A-3
STEP A-4
STEP A-2
Reference:
1
.
EV charger front cover
Reference:
1
.
Bolts - x2
2
.
Adapter plate
!
!
2
1
1
1
2
