background image

17

Installation Guide

GREEN MOTION FLEET & BUILDING

   www.eaton.com

FCC

FCC ID

This device complies with part 15 of the FCC rules . 

Operation is subject to the following two conditions: 

1.  This device may not cause harmful interference, and
2.  This device must accept any interference received, 

including interference that may cause undesired 

operation.

RF radiation exposure statement

This equipment complies with FCC RF radiation exposure 

limits set forth for an uncontrolled environment . This 

equipment should be installed and operated with a 

minimum distance of 20 centimeters between the radiator 

and your body .

Canada low-power license exempt radio  

communication devices (RSS-210)

Common information operation is subject to the  

following two conditions:

1. 

This device may not cause interference, and

2. 

This device must accept any interference, including 

interference that may cause undesired operation of  
the device .

Your Green Motion EV charger contains no user serviceable 

parts . Do not attempt to repair or service any other 

part of the unit yourself . If the unit requires servicing, 

please contact Eaton customer service . The installation, 

maintenance, and servicing of your EV charger must only 

be performed by qualified personnel in accordance with 

applicable local regulations .
Protect your EV charger from any external impact .
Take appropriate precautions with electronic medical 

implants .
Disconnect the main service power to your charger before 

cleaning the unit . Do not use cleaning solvents to clean 

any part of your charger . Use a clean, dry cloth to remove 

accumulated dust and dirt .
Ensure that the EV charging cable is positioned in such 

a way so that it will not be stepped on, tripped over, or 

subjected to damage or stress . Do not close your garage 

door on the charging cord . Best practice for EV charging 

cable storage when not in use is to wrap the cord around 

the premium cord hook and holster provided .

SKU

FCC ID

IC

GMEV40CME1B-WC

UH2-GMEV40

4706C-GMEV40

GMEV40CMC1B-WC

UH2-GMEV40

4706C-GMEV40

GMEV80CME1B-WC

UH2-GMEV80

4706C-GMEV80

GMEV80CMC1B-WC

UH2-GMEV80

4706C-GMEV80

Wi-Fi commissioning and operation

Refer to the product webpage below for detailed instructions 

on commissioning the charger using Wi-Fi, Ethernet or 

cellular and connect to a CPO provider .

Maintenance

Summary of Contents for Green Motion Fleet























Reviews: