![Eaton Green Motion DC 44/66 Installation Manual Download Page 8](http://html1.mh-extra.com/html/eaton/green-motion-dc-44-66/green-motion-dc-44-66_installation-manual_3692091008.webp)
4
GREEN MOTION DC 44/66 EV CHARGER INSTALLATION MANUAL
MN192006EN March 2023 www.eaton.com
00 Title
These instructions are intended for professional and qualified personnel.
2. Cautions
Before carrying out any operations, ensure you have read and understood this manual. Do not make changes and do
not carry out maintenance operations not described in this manual. The manufacturer does not accept responsibility for
injuries to people and property damages if the information within this manual has not been read and followed.
The operations described here must be carried out only by professional and qualified personnel.
The customer is civilly liable for the qualification and mental or physical state of the professionals who
operate this equipment. They must always use the personal protective equipment required by the laws of
the country of destination and anything else provided by their employer.
It is strictly prohibited to open the unit except as described in this manual. The installation of the equipment
must be carried out by professional and qualified personnel. They must not be under the influence of alcohol
or drugs, or have prosthetic heart valves or pacemakers.
The unit must not be subjected to any type of modification. Eaton declines any responsibility if the rules for
correct installation are not respected, and it is not responsible for the system upstream or downstream of
the equipment it supplies.
The omission of protective devices is extremely dangerous and relieves the manufacturer of any
responsibility for damage caused to people and property.
A first aid kit must be provided near the installation site so that it is readily available in case of emergency.
2.1 Operating environment and restrictions
Each system must be used exclusively for the operations it was designed for and within the operative ranges specified
in the nameplate and/or in the relative technical datasheet, in accordance with the national and international safety
standards.
Any use different from the intended use specified by the manufacturer is to be considered inappropriate and dangerous,
and in this case the manufacturer declines all responsibility.
Check the regulations applied by the electricity provider.
The unit shall be connected to the distribution network in accordance with local rules.
The unit shall comply with all the technical specifications.
For any doubts or problems regarding the use of the system, even if not described here, please contact your
Eaton sales representative via: [email protected]
Improper or unauthorized use:
Although carefully constructed, like all electrical appliances the unit can catch fire.
The unit is intended for indoor or outdoor installation.
Recommended operating temperature range of the unit is -25 °C to +45 °C.
The unit must be transported and stored in indoor locations in the temperature range -25 °C to +45 °C.
The unit must be used in locations free from acids, gases or other corrosive substances.
The unit must be used and stored in locations with relative humidity below 95%.
The unit must be transported in conditions with relative humidity below 95%.
The unit must be used at an altitude not exceeding 2000 m above sea level.