![Eaton Green Motion DC 44/66 Installation Manual Download Page 30](http://html1.mh-extra.com/html/eaton/green-motion-dc-44-66/green-motion-dc-44-66_installation-manual_3692091030.webp)
26
GREEN MOTION DC 44/66 EV CHARGER INSTALLATION MANUAL
MN192006EN March 2023 www.eaton.com
00 Title
7.2.1 Configure online EV charger connection via LAN
The EV charger router is pre-configured. However, some final setup steps are required to complete the installation.
If you face any difficulties during setup, you can contact Eaton technical support for assistance via email at
.
Follow the steps below to configure the router of the unit for connection via LAN:
Step 1
. Connect your laptop with the router via the ethernet cable as it is shown in Figure 19. On the RUTX09 wire
the internet signal cable inside a LAN (2).
Please refer to the Chapter 8.1 of this manual to open the Green Motion DC 44/66 EV charger housing.
It is possible to configure the network settings of the router located inside the EV charger. The router is located inside
the EV charger, mounted on the DIN rail on the front cover of the housing as shown in Figure 18.
Figure 18. Location of the modem/router in the EV charger
Tag
Description
1
Location of the modem/router
2
Ethernet cable entry
1
2