46
USER MANUAL FERNTEL IP4 / IP160
March 2022 www.eaton.com
Type: Ringing off
Selection parameter set to function type
Ringing off
.
State:................
Selection element for setting the function state.
1
Do not disturb is switched off.
2
Do not disturb is switched on.
Text:
[1][2]
..............
Input parameter for optional specification of caption texts.
Icon:
[1][2]
..............
Selection parameter for the optional specification of icons.
LED:
[2]
.................
Selection parameter to specify the LED operating mode in state 2.
Do not disturb........
Open next dialog to set the do not disturb.
Action:................
Selection parameter to define the action that is to be applied with do not disturb activated and
inbound calls.
Ringing off
The acoustic ring melody signaling (ringing) is switched off.
Silence
The acoustic ring melody signaling (ringing) and the optical signaling of the call in the display are
switched off.
Busy
As with the silence setting, the phone behaves toward the caller as it were busy.
For:..................
Selection parameter to specify the calls for which the activated do not disturb is to be applied.
All calls
Do not disturb is to be applied for all calls.
External calls
Do not disturb is to be applied for external calls.
Internal calls
Do not disturb is to be applied for internal calls.
5.1.6.6.13 “Call waiting” function for selected key f
Function key f controls the switching on/off of the call waiting function, with which incoming calls are signaled optically
and acoustically if there is an existing connection.
Type: Call waiting
Selection parameter set to function type
Call waiting
.
State:................
Selection element for setting the function state.
1
Call waiting is switched off, the call is not signaled.
2
Call waiting is switched on, the call is signaled optically and acoustically.
Text:
[1][2]
..............
Input parameter for optional specification of caption texts.
Icon:
[1][2]
..............
Selection parameter for the optional specification of icons.
LED:
[2]
.................
Selection parameter to specify the LED operating mode in state 2.
5.1.6.6.14 “Display phone no.” for selected key f
Function key f controls the switching on/off of the lock for the transfers of the user’s own phone number for outgoing
calls. The switched-on lock is symbolized by the icon, which is shown on the left in the display footer when the device
is in idle mode.
Type: Display phone no.
Selection parameter set to function type
Display phone no.
State:................
Selection element for setting the function state.
1
Lock is switched off, phone number is transmitted to call recipient.
2
Lock is switched on, phone number is not transmitted.
Text:
[1][2]
..............
Input parameter for optional specification of caption texts.
Icon:
[1][2]
..............
Selection parameter for the optional specification of icons.
LED:
[2]
.................
Selection parameter to specify the LED operating mode in state 2.
5.1.6.6.15 “Transfer” function for selected key f
Function key f causes the transfer of an inbound call to destination to be input manually, without interim connection to the
user. Press the function key f when there is an inbound call. The device will then ask you to input the destination number
and will transfer the call to the destination when you confirm the input by pressing the key.
Type:
Transfer
Selection parameter set to function type transfer.
Text:.................
Input parameter for optional specification of a caption text.
Icon:.................
Selection parameter for the optional specification of an icon.
