26
USER MANUAL FERNTEL IP4 / IP160
March 2022 www.eaton.com
If you are unsure of the name of the person you want to call, press the key for a short time to display all subscribers in
your contacts (phone book). However, this method only functions when initiated from the device's idle mode. If the device
is in immediate dial mode, indicated by the “Please dial” prompt, press any numerical key for at least TD2A = 2.0 s, delete
the letters using the key and then press the key. Finally, press the key, to start dialling.
4.3.4.3 Use indirect dialling context menu
The
Indirect dialling
context menu includes various options for dealing with a previously input subscriber number.
Options include sending a text message, checking the phone number transmission or establishing call diversion. Press the
menu key to open the context menu, which shows you all the options available for selection. Select the desired option
with the vertical arrow keys
,
and then press the
key to apply these to the subscriber number.
Indirect dialling
Send message.........
Dial - Show own no...
Dial - Hide own no...
Dial - No diversion..
Divert to - Always...
Divert to - Busy.....
5001
apply
Indirect dialling
1
C
The available options are described below
Send message.........
Opens the
Message
dialog, inserts the input subscriber number in the input field "
For:
" of the dialog
and waits for you to input the text message that will be sent to the subscriber when you finally press
the
key.
Dial – Show own no......
Dials the input subscriber number and in the process transfers your phone number to the subscriber,
who can see your phone number immediately.
Dial – Hide own no......
Dials the input subscriber number and in the process suppresses the transmission of your phone
number to the subscriber, who cannot see your phone number immediately.
Dial – No diversion.....
Dials the prepared subscriber number without performing possible call diversions. (If the PBX supports
this feature)
Call as user
1)
........
Opens the
Call as user
selection menu, which displays all registered co-users of the device. Use the
vertical arrow keys
,
to select the user who is to be presented to the subscriber as the caller, and
finally press the
key to start the call.
Divert to – Always
2)
...
Opens the
Call diversion
dialog, sets the selection parameter
Always
there to
On
and enters the
input subscriber number as the diversion destination under
Always
. Finally, press the
key to activate
call diversion.
Divert to – Busy
2)
....
Opens the
Call diversion
dialog, sets the selection parameter
Busy
there to on and enters the
input subscriber number as the diversion destination in the nameless input parameter under
Busy
.
Finally, press the
key to activate call diversion.
Divert to – No reply
2)
Opens the
Call diversion
dialog, sets the selection parameter
No reply
there to
On
and enters
the input subscriber number as the diversion destination in the nameless input parameter under
No
reply
. Finally, press the
key to activate call diversion.
1)
Option only appears if multiple users are registered.
2)
Option only appears if the H.323 protocol or the Local Call Forward protocol option are configured.
4.3.4.4 Switch do not disturb on/off
With do not disturb, you can switch off the ringing of the phone temporarily, for example so you can work without
interruption. The switched on do not disturb is indicated in the display's viewing area by the icon. To switch do not
disturb on or off, the key must be pressed in the phone’s idle mode until the display of the icon changes.
5.1.4.3 Do not disturb Page 35
4.3.4.5 Call lists
The phone keeps chronologically ordered lists of inbound and outbound calls and messages, the information from which
can be used to initiate callbacks or recalls.
