37
USER MANUAL FERNTEL IP4 / IP160
March 2022 www.eaton.com
Direct dial:...........
Selection parameter for switching direct dial on and off
Off
Direct dial is switched off
On
Direct dial is switched on
Number:................
Input parameter to specify the destination number and the optional DTMF characters, which are
transferred to the destination phone after successful connection. The optional DTMF characters are to
be placed after the destination number, separated by a comma.
4711
// Destination no.
4711,*101#
// Destination no. with following DTMF characters transmission
Delay (seconds):.......
Input parameter to specify the delay duration T in seconds.
0 s ≤ T ≤ 65535 s
5.1.5.2 Direct dial
Main menu\Phone settings\
Direct dial
In the direct dial dialog, a destination number can be specified that the phone will call after an adjustable delay when the
user switches from idle mode into one of the conversation modes or, for example, receiver mode. Within the running
delay time the user has the option of averting the pending direct dial by manually dialling another destination number.
To change the direct dial settings, first press the
key to open the dialog of the same name. Set your desired
configuration for the dialog elements described below and, if you have changed settings, press the menu key as many
times as necessary until the saving of the changes is confirmed by the text overlay
OK
.
Notes:
•
With the exception of the menu key
, when the delay is set to 0 s the text message the phone will superimpose the text message
Keyboard locked!
if you press a button with direct dial switched on.
Presettings:
Direct dial:.......Off
// Direct dial disabled
Number:
// Empty
Delay (seconds): 0
// Delay 0 s
5.1.5.3 Lock phone
Main menu\Phone settings\
Lock phone
The lock phone action switch activates the phone lock. The phone cannot be used for outbound calls when the lock is
activated, and inbound calls are also not signaled.
To engage the lock, first press the
key. Then you will be asked to input the device’s PIN in the open
Authentication
query. Confirm your input of the PIN by pressing the menu key . If the PIN was correct, the text overlay "
Attention,
no emergency calls possible!
" will appear and the locked phone will switch to idle mode, in which the activated
lock is indicated by the switched on icon on the left in the display footer.
5.1.5.4 Change PIN
Main menu\Phone settings\
Change PIN
In the “PIN change” dialog the PIN can be changed, which should prevent access by unauthorized users.
To change the PIN, first press the
button to open the dialog with its input parameters
Cur PIN, New PIN & New
PIN
. Then, using the numerical keys, enter the current PIN and the new PIN. The latter must be entered twice to ensure
that both inputs are identical. Switch the insertion point (cursor) from line to line using the or keys. Finally, press
the menu key to save the input new PIN as the current PIN. If the inputs were correct, the short text overlay
Changes
activated
will appear. In case of a recognized error, incorrect PIN or lack of agreement between the two newly input
PINs, the text overlay
invalid PIN
will appear briefly and, with deleted input parameters, the dialog is ready for a new
change attempt.
Presettings:
PIN....................
// Empty, PIN protection not active!
