15
USER MANUAL FERNTEL IP4 / IP160
March 2022 www.eaton.com
Input elements are configuration parameters in which a numerical and textual value is to be entered. After the left-justified
parameter name and the colon following it, the input field follows, which is marked by a flashing insertion point (cursor)
| when selected. A small, inversely displayed box in the bottom right corner of the display indicates whether the input is
in numerical mode
1
or text mode
a
|
A
. In text mode every number key is assigned a list of characters, the individual
characters of which are inserted consecutively in the current insertion position if you press the button in rapid succession.
Pause until the insertion point (cursor) switches from the left to the right side of the last inserted character “|c” -> “c|” to
definitively adopt the character. The mode will switch to numerical mode if your character selection ends with a numerical
character or you press one of the
or
#
keys. To switch to text mode, hold down a number key, e.g. the key until the
first character “|a” of the assigned list of characters is output.
3.1.1.2 Set selection parameters
Selection elements are configuration parameters for which a 1 out of N selection must be made. After the left-justified
parameter name and the comma following it, the currently selected setting value is displayed with right justification.
The N setting values identified by name form a list that can be inspected in both directions for the selected configuration
parameter using the
and/or
keys to find the desired setting.
--------- Make selection ---------
Select the next value from the selection list.
Select the previous value from the selection list.
3.1.1.3 Set input parameters
-------- Make inputs ---------
Input of numerical and text characters.
Move insertion point (cursor) one character to the left.
Move insertion point (cursor) one character to the right.
Delete character before insertion point (cursor).
3.1.1.4 Save or discard modified settings
After you have changed the settings, the changes must be saved explicitly. To do this, press the menu key until the save is
confirmed or a confirmation message appears, which you can affirm by pressing
or reject with the key sequence
.
If you want to discard your changed settings instead, press the disconnect key instead of the menu key.
2
B
A C
5
K
J L
8
U
T V
1
4
H
G I
7
Q
P RS
3
E
D F
6
N
M O
9
X
W YZ
0
#
C
2
abc
