50
USER MANUAL FERNTEL IP4 / IP160
March 2022 www.eaton.com
5.1.6.6.28 “Message” function for selected key f
The function key f causes the text message or text message template specified here to be transfered into the output
control so that manual changes/supplements can be performed on the address field
For
and the nameless message itself.
The message is sent to the recipient by pressing the menu key
Type: <msg>
Selection parameter set to function type
Destination no
.
Text:...................
Input parameter for optional specification of caption text.
Icon:...................
Selection parameter for specifying an icon.
Message.................
Open the dialog below to specify the text message or text message template.
For:......................
Input parameter for optional input of the phone number of the subscriber to whom to message
should be sent.
...........................
Nameless input parameter for optional input of the message text.
5.1.6.6.29 “Reserve” function for selected key f
Reserved for future expansions.
5.1.7 Main menu – Administration
This menu contains the administrative information for the network and for registration of the IP phone.
5.1.7.2 IP settings
This menu contains information for integration in the IP network. This is only of interest to the administrator and may not
be changed by the operator. Select “IP settings” in the administration menu.
There is the option of setting the following IP properties via this menu:
Menu item
Setting options
DHCP mode
Client
Server
off
IP addresses
Interface IP address
IP address mask
Standard IP gateway
VLAN
VLAN header off
VLAN header on
· VLAN Priority
· VLAN Identifier
5.1.7.1 Information
In this menu you can find the serial number, the firmware version number and the bootcode version number.
5.1.6.6.27 “Toggle” function for selected key f
In case of an existing speech connection, function key f causes the output of two DTMF sequences that are associated
with states 1 and 2 of the function. Here a configurable selection parameter specifies whether the output of the DTMF
sequences 1 and 2 changes when function key f is actuated or whether sequence 1 is output when function key f
is pressed and sequence 2 is output when function key f is released. The purpose of the function is, for example, to
establish a push-to-talk function for the connected device, whose behavior can be controlled by DTMF sequences.
The specifications of the DTMF sequences and the selection of the mode of operation can only be performed in
Web
Interface WebIp160\Phone\User-n\Function Keys
!
Type:
Toggle.
Selection parameter set to function type
Toggle
.
State:...............
Selection element for setting the function state.
1
Output of DTMF sequence 1 with actuation or pressing of function key f.
2
Output of DTMF sequence 2 with actuation or releasing of function key f.
Text:
[1][2]
............
Input parameter for optional specification of caption text.
Icon:
[1][2]
............
Selection parameter for specifying an icon.
LED:
[2]
...............
Selection parameter to specify the LED operating mode in state 2.
