42
USER MANUAL FERNTEL IP4 / IP160
March 2022 www.eaton.com
To the right of the figure, you can see the assignment of the phone’s keys to the function keys in the list. Two function
keys F
N
/F
N+1
each are assigned to the three “keys” input 1 – input 3, which are triggered when the activation of the inputs
is changed, as illustrated mode-dependently in the time flow chart of the figure above for input 1. The necessary mode
configuration of the inputs is to be done exclusively in the drop down lists
Input 1 – Input 3
of the web interface
WebIp160\Device\Keypad
. The mode names Mode 1-Mode 3 used in the figure are referred to there as “
Function
key, press F11,” “Function key, release F12”
and “
Function key, press F11 - release F12
.
Notes:
•
Entries in the function key list preceded by an asterisk (
1 * Jule
) are locked for phone users in the web interface
WebIp160\Phone\User-n\Function-Keys
. Attempts to open the respective dialogs will be ignored!
5.1.6.6.1 General dialog function keys
Below is the
annotated
description of a fictional function key dialog, in which the dialog elements are listed that are the
same as those of specific dialogs. The elements
Text, Icon
and
LED
are designed for phone models with soft keys that
can be labeled, and can be left in their default settings for the FernTel IP4 / IP160, which does not have this feature. The
exception to this is the
Text
element, with which you can specify the label of the function key f in the function key list,
which otherwise is labeled with the specified function type.
Type: Xyz
Selection parameter set to function type
Xyz
.
Specifies the function type of the selected function key f and causes the superimposition of the type
specific dialog elements in the dialog.
State:................
Selection element for setting the function state.
Appears only for function types where the function is differentiated by various states. The setting causes
the superimposition of the state-dependent dialog elements in the dialog. The general description is then
followed by the listing with a description of the various states that the respective function has. During
operation, each actuation of the function key f will cause the function state to change. In the example
the characteristic is continuously switched on and off by consecutive actuations.
1
Characteristic is switched off.
Function description for state 1
2
Characteristic is switched on.
Function description for state 2
Text:
[1][2]
..............
Input parameter for optional specification of caption texts.
No effect in the FernTel IP4 / IP160, with the exception of
Text
[1]
,
which replaces the standard
labeling of the f key in the function key list.
Icon:
[1][2]
..............
Selection parameter for the optional specification of icons.
No effect in the FernTel IP4 / IP160
.
LED:
[2]
.................
Selection parameter to specify the LED operating mode in state 2
No effect in the FernTel IP4 / IP160.
5.1.6.6.2 “Destination no.” function for selected key f
The f function key causes the subscriber number specified in the dialog below to be called.
Type: Destination no.
Selection parameter set to function type
Destination no.
Text:..................
Input parameter for optional specification of caption text.
Icon:..................
Selection parameter for specifying an icon.
Number:................
Input parameter to specify the destination number and the optional DTMF characters, which are
transferred to the destination phone after successful connection. The optional DTMF characters are to be
placed after the destination number, separated by a comma.
4711
// Destination no.
4711,*101#
// Destination no. with following DTMF characters transmission
Prepare:...............
Selection parameter to specify the function sequence that should be performed when pressing the button.
Off
Destination number is dialed immediately.
On
Destination number is copied into the indirect dialling and can be changed/expanded manually; the
dialling itself must also be triggered manually.
5.1.6.6.3 “Partner” function for selected key f
The function monitors the status of the partner phone specified here and performs a direct call if the f function key is
pressed in the idle mode of the partner phone, performs a call pickup in call mode and also a direct call (call waiting) in
conversation mode.
