8
EATON
ET5050 Crimp machine operator´s manual E-EQCR-TT003-E2 May 2019
Control symbols overview
The following symbols and buttons are utilized in the operation of the crimp machine:
Emergency stop button – In
the event of an emergency,
press the red emergency
stop button on the front of
the control panel. To restart,
pull and twist the emergency
stop button.
Closes the crimp tooling.
Takes you to the machine
settings.
Displays the next screen.
Motor on – to switch on the
hydraulic motor.
Crimp tooling opens
automatically after crimping
Password entry.
Activates foot switch control.
Motor off – to switch off the
hydraulic motor.
Takes you back to the
home screen.
User name.
Exits existing screen, and
returns to menu screen.
Opens the crimp tooling.
Crimp tooling does not open
automatically after crimping.
Manual retract required.
Takes you back to the
previous screen.
Crimp nominal diameter.
Crimp tooling diameter. (Size)
Offset to crimp target.
Displays current tooling
position.
Select the number of pieces
to be produced. (Manual
operation only)
Target is the die change
position.
