19
EATON
ET5050 Crimp machine operator´s manual E-EQCR-TT003-E2 May 2019
Operating instructions
Manual operation continued
Data entry field for naming
custom crimp specification.
Note: Entry not required for
operation. Save required to
retain for future use.
Offset for achieved diameter
correction. Click icon to
enter value.
Crimp diameter target
(User defined via pop up
numerical keypad).
Tooling diameter. Tooling
auto populates, displaying
suggested tooling for target
crimp diameter. Note: User
may input an alternate
tooling selection.
Clears data entered from
data entry field.
Set dwell time.
(Time at fully closed position
prior to auto open).
Set desired automatic retract
opening diameter/position.
Note: The crimp tooling
automatically retracts to this
opening diameter only when
green icon is displayed.
Auto Open
Red - Off
Green - On
(Touch icon to change)
Quick die change: Initiates
the die change, install
sequence. (Touch to change).
Additional inputs (to switch
parameters) (Page 17).
Save data to user input
database.
Return to “Home” screen.
Select number of pieces to
crimp.
Note: Not required to crimp. “0”
selection will allow unlimited
crimps.
Displays total number of
pieces crimped so far.
Displays current position of
crimp tooling/pressure of
crimp.
Icon explanations
