18
EATON
ET5050 Crimp machine operator´s manual E-EQCR-TT003-E2 May 2019
Operating instructions
Manual operation continued
Manual operation screen is shown in
figure 34. See explanation of all icon
on page 19.
To save manually entered crimp
specification, press the save data to
user input database icon.
(See figure 35).
Figure 34
Figure 35
Figure 36
Figure 37
Figure 38
Step 5
Step 6
Step 7
Step 8
Enter name of manually entered
crimp specification and then press
the check to save. (See figure 36).
1. Load hose & fitting into machine.
2. Position the scribe line on the
fitting to the edge of the tooling.
(See figure 37)
Note: Optional back stop aids in
positioning the hose and fitting assembly
before crimping. (See figure 38)
!
Never reach into the crimp tooling
with your hands while the electric
motor is running! Always make
sure there is adequate safety
distance of at least 4.75" (120 mm)
between the crimp tooling and
your hands when inserting a hose
fitting.
Caution
!
