35
EATON
ET5050 Crimp machine operator´s manual E-EQCR-TT003-E2 May 2019
Accessories
Retract
Advance
Figure 68
Figure 71
Figure 69
Figure 70
Automatic back stop (Part number: ET5040C-0006)
Replaces controller activation of the crimper, hose must
engage with backstop to cycle the crimper. (See figure 68)
Crimping stops whenever the hose no longer touches the
back stop face.
Set actuation position of backstop prior to plugging into
crimper. Automatic back stop plugs in on the side of the
electrical enclosure. (See figure 4).
Magnetic work light (Part number: ET4001C-0017)
Magnetic work light provides improved visibility in low light
conditions. (See figure 71).
Manual back stop (Part number: ET5040C-0007)
Used for position control. Locate assembly to desired
position in crimp jaws. Adjust backstop to contact fitting
assembly. (See figure 69).
Foot switch (Part number: ET5040C-0020)
Optional foot switch is available for crimp head activation/
retraction. (See figure 70). To activate foot switch, select
button on controller.
Foot switch plugs in on the side of the electrical
enclosure. (See figure 4 on page 6).
