4
EATON
ET5050 Crimp machine operator´s manual E-EQCR-TT003-E2 May 2019
Safety decal explanations
Do Not Lift
From This Side
Caution
Pinch and crush hazard.
Keep hands clear of moving
parts. Never reach into the
crimp tool with your hands
while the electric motor is
running. Always make sure
that there is an adequate
safety distance of at least
4.75" (120mm) to the
crimping tool when you are
inserting a hose fitting.
Risk of eye injury
Eye protection required.
Caution
Crush Hazard. Keep hands
clear of moving parts. Never
reach into the crimp tool
with your hands while the
electric motor is running.
Always make sure that
there is an adequate safety
distance of at least 4.75"
(120mm) to the crimping
tool when you are inserting
a hose fitting.
Electrical hazard
Only qualified electricians
should carry out work on the
electric power supply.
Caution
Lift points are to help ensure
load is evenly distributed
on fork lift when moving.
Position the heaviest part
(front) of the machine
nearest the front wheels of
the fork lift.
Do not lift from this side
Always position the heaviest
part (front) of the machine
nearest the front wheels of
the fork lift. Ensure load is
evenly distributed on fork lift
when moving.
Greaseless bearing slides
Do not lubricate bearing
slides.
Read and understand
operator's manual before
using this machine.
Failure to follow operating
instructions could result
injury or damage to
equipment.
40"
41"
66.93"
Height: 66.93" (1700 mm)
Width: 23.62" (599 mm)
(center line of crimp head)
Length: 47.24 (2299 mm)
Note: Minimum of 36" of perimeter clearance is recommended for safety and maintenance.
Dimensions:
