24
EATON
ET5050 Crimp machine operator´s manual E-EQCR-TT003-E2 May 2019
Settings
Setting #4 - tooling editor
Add a new die set to the list.
Proceed to next setting
(forward).
Delete a die set from the list.
Exit settings menu.
Restore complete Eaton
tooling list.
Return to previous setting
(back).
Note: When the machine is delivered, the tooling editor contains all of the
Eaton die sets. Remove the dies not purchased with the machine to direct
the machine to the available dies. (See figure 45).
Dies displayed by nominal size.
Example: ET5040DC-M320S = 32.0
Figure 45
