10
Compass sit-to-stand
Installation Manual
COMPASS SIT-TO-STAND INSTALLATION MANUAL
Eaton.com/compass
A. Assemble the worksurface support
NOTE:
The worksurface support should be pre-assembled as
– received from the factory�
If it is not, follow the following steps:
•
Place worksurface upside down on a flat surface�
NOTICE
Protect finished laminate surface from scratches, or other
possible damage�
•
Align the support and bracket (if required) to the worksurface
using the holes pre-drilled in worksurface for alignment�
•
Secure the support using #10 x 1" Phillips head wood
screws (A)� Use only the round holes to attach the support�
The slotted holes are reserved for the control box�
SECTION III – Assembling the desk
All Linear Type
Free Standing
Corner Type
Integrated Corner
Type
Worksurface
Bracket
Support
Support
#10 x 1" phillips
head wood screws
Support
