1 Introduction
1.1 Scope of this document
BreakerVisu
06/16 MN01210001Z-EN
www.eaton.com
7
1 Introduction
1.1 Scope of this document
This manual goes over the BreakerVisu device and its main characteristics.
It focuses mainly on how to configure and commission the device, as well as
on how to use the program menu and view measured values.
This manual makes reference to other Eaton BreakerVisu products and
devices as well. For detailed information on these devices, please refer to
the corresponding documentation.
1.2 Introduction
BreakerVisu is a device that features a touch panel and software for
displaying and measuring low-voltage system parameters. It is designed to
acquire operational data from multiple power distribution devices. In addition,
it is ready for operation right out of the box, as it requires no programming or
configuration skills on behalf of operators. Instead, the only steps required
for commissioning are setting up the relevant system and network
configurations.
The main tasks performed by BreakerVisu are acquiring data from connected
devices and carrying out measurements. Users can search for newly
connected devices and navigate to these devices in order to start a variety of
measurements at the device and system levels. The system‘s user interface
also features additional integrated system functions that make it possible to
import new device types, configure system parameters, license additional
functionalities, establish configuration locks if required due to security
reasons, display and manage permissions, and select user interface
languages. These functions are described in greater detail in this manual.
1.3 BreakerVisu variants
BreakerVisu features a touch panel that is available in two sizes: 3.5“ and 7“.
The available communication interfaces on the cards will depend on the
specific BreakerVisu variant being used.
Table 1: BreakerVisu device variants
￫
For more details on the hardware, please refer to the
corresponding hardware manual, MN048013EN.
BreakerVisu device
variant
Article no.
Screen
size
Number of
Modbus RTU devices
Number of
SmartWire-DT
devices
NZM-XMC-MDISP35-MOD
172764
3.5“
8
–
NZM-XMC-MDISP35-SWD
172765
3.5“
–
8
NZM-XMC-MDISP70
172766
7“
32
16
Summary of Contents for BreakerVisu NZM-XMC-MDISP35-MOD
Page 4: ...2...
