Eaton BreakerVisu NZM-XMC-MDISP35-MOD, Manual

Page: 39 / 88

2 Operator interface
2.7 “Extras” screen
BreakerVisu 06/16 MN01210001Z-EN www.eaton.com
37
Table 38: Controls – Security settings (3.5“ variant)
Table 39: Controls – Console lock (3.5“ variant)
Figure 32:“Extras” screen – License other features (3.5“ variant)
Control Action
A user password can be used to lock and unlock all of
the BreakerVisu program‘s configuration functions.
The password, which is case-sensitive, can have a
maximum of six characters. The default password is
123456 .
Tap the old password field to enter the current
password.Then tap the new password field to enter
a new password.
If you enter the old password correctly and the values
in the New and Re-type fields match, you will be able
to save the new password by tapping the
Save
button.
If there is a problem when you try to enter the new
password, the system will show a description of the
problem in the corresponding fields.
Control Action
Tap the Panel Lock pane to enter the current user
password.
After you enter the right password, you will be able to
lock and unlock all BreakerVisu program configuration
functions by tapping the
Lock or Unlock button as
applicable (the button is the same for both, with the
text changing depending on the system‘s current
status). If you enter the wrong password, the button
will show a warning. As soon as you enter the right
password, the lock will be lifted and the password
you entered will be deleted from the field, meaning
that it will have to be entered again before the next
user action.