2 Operator interface
2.7 “Extras” screen
26
BreakerVisu
06/16 MN01210001Z-EN
www.eaton.com
2.6.2 3.5“ variant
Figure 19:Power monitoring screen (3.5“ variant)
Figure 19 shows a BreakerVisu system with a locked
panel lock; in it, the power monitoring function is activated (as indicated by
the green circle next to the selected scan times).
Table 20: Overview screen controls (3.5“ variant)
2.7 “Extras” screen
2.7.1 7“ variant
There are two screens called
Extras
that can be used to configure the
BreakerVisu program‘s parameters and settings.
Control
Action
Tapping this button will make the system store the trip block‘s power value
at 15-minute intervals starting the moment an hour starts (for example:
00:00, 00:15, 00:30, 00:45, etc.).
A green circle indicates that the measuring function is running.
Tapping this button will make the system store the trip block‘s power value
at the beginning of every hour.
Tapping this button will make the system store the trip block‘s power value
every day at 00:00 (12:00 a.m.).
Tapping this button will make the system store the trip block‘s power value
at 00:00 the first day of every week.
The white circle indicates that the monitoring function is turned off.
Tapping this button will make the system store the trip block‘s power value
at 00:00 the first day of every month.
Tapping this button will make the system store the trip block‘s power value
at 00:00 the first day of every year.
Summary of Contents for BreakerVisu NZM-XMC-MDISP35-MOD
Page 4: ...2...
