2 Operator interface
2.3 “Start” window
12
BreakerVisu
06/16 MN01210001Z-EN
www.eaton.com
2.2.2 3.5“ variant
The main menu in the 3.5“ BreakerVisu variant only has one button for
accessing the device overview. The reason for this is that the 3.5“ variant
comes with either a Modbus RTU or a SmartWire-DT communication
interface, meaning that it is not necessary to distinguish between networks
when accessing the overview. This BreakerVisu variant allows for up to eight
devices to be configured. Also, please note that the main menu will not
appear in the device details screen in the 3.5“ variant.
Figure 3: Main menu (3.5“ variant)
Table 5: Main menu controls (3.5“ variant)
2.3 “Start” window
The home screen shows the date and time and provides an overview of the
BreakerVisu system in terms of connected devices, warnings, measurement
settings, and when measurements start. In both BreakerVisu size variants,
this screen includes not only the main menu, but also buttons that can be
used to access the available languages and an overview of notifications.
Control
Action
Tap the
Start
button to open the BreakerVisu program‘s home screen.
Button used to access the device overview screen.
Device overview screens provide basic information regarding the corresponding
device groups.
Button used to access the power monitoring settings and status functions.
Button used to access various system settings, the BreakerVisu program
configuration, the user management functions, and the licensing functions.
Summary of Contents for BreakerVisu NZM-XMC-MDISP35-MOD
Page 4: ...2...
