2 Operator interface
2.5 “Device details” screen
BreakerVisu
06/16 MN01210001Z-EN
www.eaton.com
19
2.5.1 7“ variant
Figure 8: Device details – Main data (7“ variant)
Table 12: “Device details” controls (7“ variant)
The
More data
sub-screen shows additional information regarding the
device‘s operating conditions. In the case of third-party devices, you will be
able to add additional device parameters.
Figure 9: “Device details” – “More data” (7“ variant)
The
History
sub-screen lists the device‘s most recent events. In the case of
trip blocks that feature internal memory containing lists of events, a log of
these events can be stored in a data file on an external storage device
(SD card, USB flash drive) plugged into the BreakerVisu device.
Control
Action
There are no special controls in the
“Main data” screen.
You can use the general controls shown
on all device details screens in order to go
back to any option in the main menu or use
the tabs to access one of the sub-screens.
Idle for 15 minutes
If the user does not perform any action on
one of the device details screens for more
than 15 minutes, the BreakerVisu program
will automatically switch back to the
BreakerVisu home screen.
￫
Chapter 9, “Importing 3rd party Modbus devices” explains
how to configure third-party devices in detail.
Summary of Contents for BreakerVisu NZM-XMC-MDISP35-MOD
Page 4: ...2...
