manualshive.com logo in svg

easyRAID NAS easyRAID FN-420GT, Operation Manual

Share
Download
easyRAID NAS easyRAID FN-420GT Operation Manual Download Page 64

 

 

-63-                      easyRAID NAS FN-420GT Operation Manual 

3-5-5 FTP 
 

 

In case, there is single fixed IP available and the system is 
located behind NAT, please make sure the IP sharing unit 
and easyRAID FTP has identical setting as red circle in 
below figure.   

 
The system supports FTP (File Transfer Protocol) service to share data with FTP 
clients. This page provides related parameter settings and is shown in figure 3-55. 

 

 

Figure 3-55 Enable FTP Network Service 

• 

Status

 : This radio button group enables/disable FTP service of the system. 

• 

Auto Rename

 : If this option is set, FTP server will never overwrite files. When 

a file whose name already exist is uploaded, it get automatically renamed to 
file.1, file.2, file.3, ...   

• 

No Rename

 : If this option is set, users can not rename files.   

• 

Passive IP

 : Passive IP address in PASV/EPSV/SPSV replies. - for NAT 

• 

Passive Port

 : Port range for passive connections replies (Passive ports larger 

Summary of Contents for easyRAID FN-420GT

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands