-35- easyRAID NAS FN-420GT Operation Manual
If “Sender E-Mail Address” is not set and “Default” is used, messages will be
transferred by easyRAID E-Mail to “E-Mail Address 1~3 of The Administrator.” It is
recommended to change “Default” to the E-Mail Address of The MIS Administrator.
3. Mail Server Address: Enter the IP Address of SMTP server and the mail server
name.
4. E-Mail Address 1~3 of The Administrator: Enter e-mail addresses of the
administrator here. The system will automatically send out system messages to
the e-mail addresses that you have set.
5. Send a Test E-Mail: If “Yes” is selected, the system sends a “test” e-mail to the
configured e-mail addresses after “Update” button is clicked to make sure proper
delivery of report messages.
Figure 3-9 Send a Testing E-Mail
After select “Yes” for “Send a Test E-Mail”, click “Update”. A test
e-mail will be sent to the configured e-mail addresses owner.
Figure 3-10 Testing E-Mail Sent Screen
