manualshive.com logo in svg

easyRAID NAS easyRAID FN-420GT, Operation Manual

Share
Download
easyRAID NAS easyRAID FN-420GT Operation Manual Download Page 109

 

 

-108-                      easyRAID NAS FN-420GT Operation Manual 

 

Figure 5-1 Disk Auto-Rebuild 

 
 
Please follow the following steps to replace the failed HDD: 
(1)   Make sure you have a replacement HDD and its capacity must be equal or 

greater than the damaged HDD. 

(2)   Pull the damaged HDD out of its Caddy. Make sure the indicator LED is red on 

the Caddy from which it will be drawn. Taking out the wrong drive 

WILL

 destroy 

your data. 

(3)   Take out the damaged HDD and replace with the new HDD. 
(4)   Put the Caddy back into the easyRAID NAS System unit 
 
Using RAID-1 provides protection against only one damaged HDD. If 2 HDD are 
damaged at the same time or the system administrator mistakenly replaces a 
not-damaged HDD, all data in the RAID storage volume 

WILL BE LOST

. 

 
 
 

5-5 Automatic Data Recovery 

 
If a RAID-1 function is enabled, easyRAID NAS System will automatically recover the 
data onto the new HDD.   
 

Summary of Contents for easyRAID FN-420GT

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands