manualshive.com logo in svg

easyRAID NAS easyRAID FN-420GT, Operation Manual

Share
Download
easyRAID NAS easyRAID FN-420GT Operation Manual Download Page 23

 

 

-22-                      easyRAID NAS FN-420GT Operation Manual 

2-13-6 RAID-5 Storage Volume—Disk Striping with Distributed Parity 

 
Figure 2-16 shows the screen when RAID-5 Option is used. 
 

 

 

Figure 2-16 RAID-5 Storage Volume 

 
1. Free disks:  A list of all HDD that has installed in the system but not configured as 

storage volume yet. 

2. RAID disks:  A list of all HDD that are already added into the storage volume. To 

add a HDD, click the “ ” right arrow button to add it into the RAID-5 
storage volume. 

3. Spare disks:  Shows the designated replacement HDD in the storage volume. (The 

backup HDD for a damaged HDD) 

4. Stripe size:    Maximize the performance of sequential file in the storage volume. 

There is no need to change the settings in general, unless the 
advanced administrator has special file storage layout in the storage 
volume. 

When settings are done, click the “OK” button. If you change your mind, click the “

” 

left arrow button to put it back to the unused HDD list. 

Summary of Contents for easyRAID FN-420GT

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands