-11- easyRAID NAS FN-420GT Operation Manual
8. Setup IP address Manually
9. Use the “
▲
” up and “
▼
” down arrows to select “112CH0 IP ADDR.” Press “Enter”
to set the IP Address.
10. Every time you type an IP digit, press “Enter” once before punching in another
digit.
11. Use the “
▲
” up and “
▼
” down arrows to select “113CH0 NetMask.” Press “Enter”
to set the Sub-network Mask IP Address. (Optional)
12. Type the Sub-network Mask IP Address. (If not supplied, system will set to default)
13. Press “ESC” key 4 times continuously to exit the main menu. At this moment, the
LCD front control panel will display all relevant information, such as CPU
temperature, fan speed, and the set IP address, etc.
The following “Gateway“ setting is only apply for “Channel 1” and its no need
for “Channel 0”.
14. Use the “
▲
” up and “
▼
” down arrows to select “124CH1 GateWay.” Press “Enter”
to set the Gateway IP Address. (Optional)
15. Type the Gateway IP Address. (If not supplied, system will set to default).
16. Refer to step 13 to exit the main menu.
2-6 Connecting to a Network
When all system configurations are set and connected to the network, type the IP
Address via an internet browser (e.g. Internet Explorer) to access the system
administrative web page and complete all administrative tasks.
