manualshive.com logo in svg

easyRAID NAS easyRAID FN-420GT, Operation Manual

Share
Download
easyRAID NAS easyRAID FN-420GT Operation Manual Download Page 5

 

 

-4-                      easyRAID NAS FN-420GT Operation Manual 

Chapter 1 

Introduction to easyRAID 420GT NAS FAMILY 

 
 
 
easyRAID NAS 420GT is a RAID enabled NAS (Network Attached Storage). The 
ability of the unit to conduct continual self tests, beyond unsymmetrical fault tolerance, 
data validation functions provided by RAID Level 0,1,3 and 5, the availability of 
cooling fans and hot-swap function make the easyRAID family of network attached 
storage with hard disk drive array even more reliable and easy to use. 
 
 
 
 
 

1-1 easyRAID 420GT NAS Family Features 

 

 

Completely OS Independent networking storage system. 

 

Basic system configuration is easily done via web browser. 

 

LCD Front Control Panel displays the system status and OS Configuration. 

 

Hard Disk Drive Error indicator LED. 

 

Automatic Formatting, Data Replacement and Recovery. 

 

Support UPS device (APC Back-UPS ES 500 and Smart series with RS-232                     

Interface). 

 

Support 2*RJ45 Ethernet Port. (One 10/100/1000 Mb, One 10/100 Mb) 

 

Quick Configuration Function makes first-time system configuration easy. 

 

Firmware upgradeable. 

 

Support hard disk drive hot-swap. 

 

Fan and Power System Failure automatic detection. 

 

Automatic over-heat detection. 

 
 

Summary of Contents for easyRAID FN-420GT

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands