manualshive.com logo in svg

easyRAID NAS easyRAID FN-420GT, Operation Manual

Share
Download
easyRAID NAS easyRAID FN-420GT Operation Manual Download Page 20

 

 

-19-                      easyRAID NAS FN-420GT Operation Manual 

2-13-3 RAID-0 Storage Volume—Disk Striping

 

 
Figure 2-13 shows the screen when RAID-0 Option is used. 
 

 

 

Figure 2-13 RAID-0 Storage Volume 

 
 

1. Available HDD: A list of all HDD that has installed in the system but not configured 

as storage volume yet. 

2. RAID HDD:    Select desired HDD and click the “ ” right arrow button to add it 

into the RAID-0 storage volume. If you change your mind, click the 
“

” left arrow button to put it back to the unused HDD list. 

3. Stripe Size:    Maximize the performance of sequential file in the storage volume. 

There is no need to change the settings in general, unless the 
advanced administrator has special file storage layout in the storage 
volume. 

4. When settings are done, click “OK” button. 

 

 

A single HDD can not support RAID-0. It requires at least 
2 HDD. 

 

 

RAID-0 does not have any safety features, such as “Data 
Synchronization” and “Automatic Data Recovery.” 

Summary of Contents for easyRAID FN-420GT

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands